A full 60.000KM of pure comfort and reliability. Equipped with the most advanced travel electronics such as front and rear radar with adaptive cruise control and blind spot detection systems and full integrated navigation and new generation LED lighting. Comfort enhanced thanks to the aerodinamic protection designed through accurate wind tunnel sessions.
Multistrada V2
Multistrada V2 S
V4
V4 S
V4 S Sport
V4 Pikes Peak
The engine of the Multistrada V2 is the last evolution of the twin-cylinder Ducati Testastretta 11° da 937 cm³ with desmodromic distribution. This engine, four valves per cylinder, water-cooled, delivers 113 horsepower and approximately 10 kgm of maximum torque in Euro 5* configuration, features an excellent level of reliability and the ability to combine performance and adrenaline with a regular and always manageable power delivery, putting a sports bike that is never aggressive in the hands of the rider.
The Multistrada V2 is equipped with a 48 mm diameter upside-down front fork with170 mm travel, dedicated cast end caps, adjustable in spring preload and hydraulic brake in rebound and compression.
The spring is progressive, with a consequent increase in riding comfort even with the vehicle fully loaded. The rear wheel travel is 170 mm. In the S version, Multistrada V2 è dotata di serie anche del Ducati Skyhook Suspension EVO semi-active suspension system, which is based on a 48 mm SACHS fork and a SACHS rear shock absorber, both electronic, with the possibility of adjusting the hydraulic brake in compression and extension in a continuous manner according to a semi-active control approach capable of guaranteeing the ideal set-up of the vehicle, improving safety and comfort.
The entire Multistrada V2 family is equipped with Brembo brakes with ABS Cornering function. The front system features Brembo M4-32 monobloc radial calipers with four 32 mm diameter pistons and two pads, radial pump with adjustable levers and double 320 mm front disc with aluminium flanges. At the rear we can find a single 265 mm diameter disc on which a floating caliper, also Brembo, works.
The scheme adopted for the chassis of the Multistrada V2 includes a front trellis frame together with two cast side frames, closed off by a rear load-bearing element made of techno-polymer loaded with glass fibre for maximum torsional rigidity, with the addition of the double-sided swingarm made in shell cast aluminium.
The weight reduction work conducted on the bike has made it possible to obtain a final dry weight of 199 kg (202 kg for the S version), 5 kg less than the Multistrada 950. The engine has lost about 2 kg. Among the vehicle components, the new rims stand out (-1.7 kg), together with the Multistrada V4 mirrors (-0.7 kg) and the front brake disc flanges, now in aluminium (-0.5 kg). In addition, with regard to the wheel rims, new spoked rims are also available as an accessory, also significantly lighter (available starting from spring 2022). The reduction in weight of the wheel rims guarantees a marked improvement in vehicle dynamics.
The height has been reduced to 830 mm, with a redesigned shape of the saddle which is now narrower and more compact between the rider’s legs to allow you to easily touch the ground with your feet thanks to an inseam arch of only 1790mm.
These changes provide safety when the bike is stationary and improve confidence when manoeuvring at low speed even with a passenger and full cases. Furthermore, in the Ducati Performance catalogue a low seat and a lowered suspension kit are available which, combined, allow you to reach a height of 790mm (available starting from middle 2022, only for S version).
In addition, the distance from the seat to the rider’s footrest has been increased to 490 mm in order to provide more room for taller riders, who can now ride more comfortably for many hours.
DTC is a very smart system which acts as a “filter” between the rider’s right hand and the rear wheel. In just a few milliseconds, DTC can record and subsequently control the spinning of the rear wheel, contributing to increasing the performance and active safety of the bike.
The system offers eight different levels, each programmed to provide a certain tolerance level for rear end sliding, and thus suitable for the progressive riding skill levels. Level one is designed to offer less interaction and is destined for more expert riders, in good riding conditions, while level eight involves greater interaction and has been developed to offer complete confidence to all riders, also in wet and slippery conditions.
The DTC levels are preset as standard in each of the three Riding Modes, but can be selected individually by accessing an intuitive menu, in order to best meet the rider’s needs.
The Riding Mode Urban instantly changes the character of the XDiavel S, transforming it into an easy to handle form of transport which feels safe. The power supplied is reduced to 100 hp, the DTC is set at level 6 and the ABS profile is set to Safe & Stable, in order to always move in complete safety, even on uneven surfaces and in heavier traffic.
The Riding Mode Touring enables the engine to supply all its 160 hp* but with a soft and easy to handle power curve. The DTC is set to level 4 and the ABS on Safe & Stable, for pleasant and relaxed riding, ideal for maximum comfort for the rider and passenger on long journeys.
The Riding Mode Sport offers pure fun, with the engine releasing 160 hp* through a precise, expert touch of the accelerator. To experience the performance of the XDiavel S without any compromise, Sport Mode reduces the DTC to level 2 and sets the ABS to Sport mode.
*Euro-5 version
The high quality Brembo components combined with ABS, the specific suspension set-up and Pirelli Enhanced Patch Technology guarantee excellent braking performance for the XDiavel S as well as utmost safety in all conditions and for riders of any level.
The system can act in a more or less sensitive way and the intervention level can be chosen by the rider based on their experience and road and/or use conditions.
There are three ABS profiles available (Expert, Sport and Safe & Stable) and they are preset as standard in each of the three Riding Modes, but can be called up individually by accessing a user-friendly menu.
The XDiavel S has a 50 mm diameter front fork with black anodised sheaths, which can be completely adjusted in the hydraulic braking in compression and extension and in the spring preload (the S version also has stems with DLC coating). The fork has the compression register and spring preload on the left stem, while the extension register is located on the right stem. With a steering inclination of 30° and a 130 mm trail, the set-up of the XDiavel S enables an agile and controllable front end, thus guaranteeing exceptional handling and a notable steering angle. On the other hand, at the rear the XDiavel S has an adjustable mono-shock in the spring preload and in extension, equipped with a separate fuel tank. Mounted almost horizontally, the shock absorber works together with progressive kinematics.
In addition, for anyone favouring a more sports riding position, a Ducati Performance “central footpegs” kit will be available, sold as an optional extra. The XDiavel S guarantees a maximum lean angle of 40 degrees, an unthinkable value for motorcycles with forward footpegs.
The power supplied by the engine is no longer regulated solely and directly by the accelerator cable, but passes through the control unit which, on the basis of the signal received, electronically regulation the opening of the throttle.
The RbW system uses three different mappings to regulate the supply of power: Sport, Touring and Urban.
The DPL has 3 intervention modes where level 1 is the one able to provide maximum performance.
The DPL is operated by pressing the dedicated button positioned on the right-hand switch. Once activated it is possible to select the intervention level through the menu which opens up on the dashboard. Once the level is selected, the rider must use the clutch, put it in first gear and completely open the gas. At this point, simply by gradually releasing the clutch, it is possible to make an explosive start.
The system automatically switches off on exceeding 120 km/h, or when third gear is engaged, or when speed drops to under 5 km/h. In order to protect the clutch, the system uses an algorithm which enables only a limited number of consecutive starts. The starts are recalculated one by one during normal use of the bike.
DTC is a very smart system which acts as a “filter” between the rider’s right hand and the rear wheel. In just a few milliseconds, DTC can record and subsequently control the spinning of the rear wheel, contributing to increasing the performance and active safety of the bike.
The system offers eight different levels, each programmed to provide a certain tolerance level for rear end sliding, and thus suitable for the progressive riding skill levels. Level one is designed to offer less interaction and is destined for more expert riders, in good riding conditions, while level eight involves greater interaction and has been developed to offer complete confidence to all riders, also in wet and slippery conditions.
The DTC levels are preset as standard in each of the three Riding Modes, but can be selected individually by accessing an intuitive menu, in order to best meet the rider’s needs.
The Riding Mode Urban instantly changes the character of the XDiavel, transforming it into an easy to handle form of transport which feels safe. The power supplied is reduced to 100 hp, the DTC is set at level 6 and the ABS profile is set to Safe & Stable, in order to always move in complete safety, even on uneven surfaces and in heavier traffic.
The Riding Mode Touring enables the engine to supply all its 160 hp* but with a soft and easy to handle power curve. The DTC is set to level 4 and the ABS on Safe & Stable, for pleasant and relaxed riding, ideal for maximum comfort for the rider and passenger on long journeys.
The Riding Mode Sport offers pure fun, with the engine releasing 160 hp* through a precise, expert touch of the accelerator. To experience the performance of the XDiavel without any compromise, Sport Mode reduces the DTC to level 2 and sets the ABS to Sport mode.
The high quality Brembo components combined with ABS, the specific suspension set-up and Pirelli Enhanced Patch Technology guarantee excellent braking performance for the XDiavel S as well as utmost safety in all conditions and for riders of any level.
The system can act in a more or less sensitive way and the intervention level can be chosen by the rider based on their experience and road and/or use conditions.
There are three ABS profiles available (Expert, Sport and Safe & Stable) and they are preset as standard in each of the three Riding Modes, but can be called up individually by accessing a user-friendly menu.
The XDiavel has a 50 mm diameter front fork with black anodised sheaths, which can be completely adjusted in the hydraulic braking in compression and extension and in the spring preload (the S version also has stems with DLC coating). The fork has the compression register and spring preload on the left stem, while the extension register is located on the right stem. With a steering inclination of 30° and a 130 mm trail, the set-up of the XDiavel enables an agile and controllable front end, thus guaranteeing exceptional handling and a notable steering angle. On the other hand, at the rear the XDiavel has an adjustable mono-shock in the spring preload and in extension, equipped with a separate fuel tank. Mounted almost horizontally, the shock absorber works together with progressive kinematics.
In addition, for anyone favouring a more sports riding position, a Ducati Performance “central footpegs” kit will be available, sold as an optional extra. The XDiavel guarantees a maximum lean angle of 40 degrees, an unthinkable value for motorcycles with forward footpegs.
The DPL has 3 intervention modes where level 1 is the one able to provide maximum performance. The DPL is operated by pressing the dedicated button positioned on the right-hand switch. Once activated it is possible to select the intervention level through the menu which opens up on the dashboard. Once the level is selected, the rider must use the clutch, put it in first gear and completely open the gas. At this point, simply by gradually releasing the clutch, it is possible to make an explosive start.
The system automatically switches off on exceeding 120 km/h, or when third gear is engaged, or when speed drops to under 5 km/h. In order to protect the clutch, the system uses an algorithm which enables only a limited number of consecutive starts. The starts are recalculated one by one during normal use of the bike.
The power supplied by the engine is no longer regulated solely and directly by the accelerator cable, but passes through the control unit which, on the basis of the signal received, electronically regulation the opening of the throttle.
The RbW system uses three different mappings to regulate the supply of power: Sport, Touring and Urban.
Selecting Sport gives the rider 214 hp, with direct sport-style Ride by Wire throttle response and, on the S version, a sport style suspension set-up. Electronic control settings allow even less experienced riders to enjoy effective, spectacular handling. In Sport mode, for example, the Slide by Brake function is engaged, allowing riders to drift into corners safely. Rear wheel lift detection during braking is on and the ABS Cornering function is set to maximise cornering performance.
As the name suggests, Race RM has been developed for expert riders who want to use all the potential of the Panigale V4 on high-grip racetracks. By selecting Race, the rider can count on 214 hp, with direct Ride-by-Wire throttle response and, on the S version, a very firm suspension set-up to optimise performance. Race mode sets the electronics at a low intervention level, but without reducing safety: to maximise braking performance the ABS kicks is on the front wheel only but the Cornering function remains on at all times.
Riding Modes provide users with three different pre-set riding styles so that Panigale V4 performance can be adapted to the rider, the nature of the track/route and weather conditions. Changing the Riding Modes instantaneously changes the character of the engine, the electronic control parameters and, on the S version, the suspension set-up too. Riders can, of course, personalise parameters to suit their riding style and subsequently restore Ducati factory settings.
The Panigale V4 features a latest-generation electronics package based on a 6-axis inertial platform which instantly detects the bike’s roll, yaw and pitch angles.
The electronics package oversees every aspect of the ride: some controls supervise start, acceleration and braking, others govern traction and others again lend a helping hand on corners and out-of-the-corner stretches.
The operational parameters for each of these controls are associated by default with the three Panigale V4 Riding Modes. Riders can personalise parameters to suit their riding style or restore Ducati factory settings. DTC, DWC, DSC or EBC control levels can be adjusted quickly via the left switchgear.
The Panigale V4 is equipped with a 43 mm Showa Big Piston Fork (BPF) that provides fully adjustable spring pre-load and compression and rebound damping. The fork bodies house chrome sliders with Brembo radial caliper mountings. A Sachs steering damper completes the front-end package. At the rear there is a fully adjustable Sachs shock absorber, one side of which is attached to the Desmosedici Stradale engine via a forged aluminium bracket.
The Panigale V4 S, instead, mounts an Öhlins NIX-30 fork, an Öhlins TTX36 rear shock absorber and an Öhlins event-based steering damper. On this version suspension and steering damper are controlled by the second-generation Öhlins Smart EC 2.0 system which, among other things, features the new OBTi (Objective Based Tuning Interface).
On both versions, fork and single-sided swingarm have softer, less pre-loaded springs, resulting in more efficient use of suspension travel to even out pits and ripples on the asphalt. The combination of reduced fork stiffness and higher pre-loading gives better dive control during braking, resulting in easier, more intuitive turn-ins, especially for the less expert rider.
The fork mounting has been lowered 4 mm, while the suspension now has two link rods that are shorter by 5 mm. These changes have resulted in a 5 mm higher bike barycentre. The result? The bike is swifter at the drop-in and arrives at the apex faster.
A higher rear end also increases the chain pull angle: this results in an anti-squat effect and, therefore, greater bike stability during acceleration.
With a 24.5° rake and 100 mm trail, steering geometry remains unchanged.
The Front Frame is now the same as the one on the V4 R but differs slightly on account of the lighter, machined sides; these ensure attainment of the stiffness targets set by Ducati Corse for the SBK championship and reduce weight even further.
Greater frame flexibility means less on-track tyre stress and improved front-end ‘feel’ at maximum lean angles.
Completing the chassis is the light magnesium front sub-frame and the shell-cast aluminium seat sub-frame (attached to the Front Frame at the top and bolted to the head of the rear cylinder bank below).
Major changes on the Panigale V4 MY2020 chassis have seen the introduction of the Front Frame. Built according to Ducati Corse specifications, the latter features a special suspension set-up with a higher barycentre, an increased chain pull angle and improved use of suspension travel. Thanks to these modifications, the bike is easier to lay into the corner when you ease off the brakes, gets to the apex faster, soaks up any pits or ripples more effectively and behaves more neutrally out of the corner.
Variable height intake funnels optimise cylinder filling at all rotation speeds with important benefits in terms of power and rideability. The fuel supply system is thus completed by oval throttle bodies, each with two injectors: one below the throttle and the other above.
Starting from the Desmosedici GP engine, the manufacturing technologies, the materials and the auxiliary components layouts have been modified to achieve the required road durability, achieving standard maintenance intervals of 24,000 km (Desmo Service), Euro 4 homologation and high production capacity.
The bore of (81 mm) is the same as that used by the Desmosedici GP engine and is the maximum dimension allowed by MotoGP regulations. It is also the highest in the four-cylinder supersport segment.
The stroke (53.5 mm) is longer compared to the Desmosedici GP engine in order to deliver higher torque on open road use, and to reduce maximum engine rotation speed.
The use of the same bore as the Desmosedici GP engine means that all the fluid dynamics (valves, intake pipes, throttle bodies), which in fact make up the heart of the engine where the performance is generated are also very similar in the two drive units.
The V4 90° layout makes the engine extremely compact, allowing the centring of the masses and better integration into the bike. In fact, the Desmosedici Stradale has been inserted into the vehicle with the front bank of the cylinders rotated back by 42° with respect to the horizontal plane, as on the Ducati engines competing in MotoGP. This optimises the distribution of weight, allows for the use of more extensive radiators and makes it possible to shift the swinging arm pivot forwards.
Its architecture also generates a natural balancing of first-order forces, without the gain in weight and loss of power of a balance shaft.
The Desmosedici Stradale was developed to combine racing performance with all the necessities for road use. To maximise mid-range torque – so important for the enjoyability of motorcycles on roads open to traffic – and to achieve torque and power at slower speeds, the engine has a larger displacement than the MotoGP version, specifically 1,103 cm³. It delivers a power output of more than 155 kW (210 hp) at 13,000 rpm and a maximum torque of over 120 Nm (12.2 Kgm) from 8,750 to 12,250 rpm in the Euro 4 version.
The Panigale V4 MY2020 features new, specially developed Ride by Wire system mappings with several torque delivery control settings. Track-dedicated RbW mapping aligns rider demand with delivered torque more closely, resulting in smoother, more predictable throttle response. The new torque delivery control strategy lets the rider stabilise more easily on the desired throttle aperture through and out of the corners. Additionally, linearization of torque curves in gears I, II and III varies according to the selected Power Mode to minimise stability loss during acceleration.
The front headlight assembly is extremely compact thanks to the adoption of two small LED low beam / high beam modules. The Daytime Running Light and the upper rim of the dual headlight assembly create a ‘browed’ look, the modern hallmark of Ducati sports bikes. At the rear, instead, the full-LED tail light features a two-part design as per Ducati sports tradition. The dual red arch of the side light makes the Panigale V2 both unique and assertive. Front and rear LED indicators complete the lighting system.
Instrumentation on the Panigale V2 features a 4.3″ TFT display. Graphics and interface make menu browsing and adjustments easy while allowing more immediate identification of the selected Riding Mode. The Riding Mode interface clearly and immediately shows any changes being made to the settings. This is done thanks to the explanatory graphics of the system being adjusted and a graduated scale indicating whether the modification is better suited to performance or safety/stability.
The Panigale V2 features modern electronics based on a 6-axis inertial platform which instantly detects the bike’s roll, yaw and pitch angles.
The new electronics package raises active safety and dynamic control standards by adding the cornering function to the ABS, upgrading the quickshift so it now covers down-changes and including traction control, engine brake control and wheelie control.
As you’d expect, all controls are incorporated in the three Riding Modes (Race, Sport, Street) and can be adjusted via the new 4.3″ colour TFT dashboard. Featuring a user-friendly graphic interface browsing menus, adjusting settings and identifying the selected Riding Mode couldn’t be easier.
The Panigale V2 has a 5-spoke, 3.5 inch wheel at the front and 5.5 inch wheel at the rear, both rolling on Pirelli Diablo Rosso Corsa II tyres: 120/70 ZR17 at the front and a nimble 180/60 x ZR17 at the rear.
Pirelli’s first multi-compound bike tyre, the Diablo Rosso Corsa II combines racetrack performance with road versatility, making it just perfect for the Panigale V2. Multi-compound technology was developed out of Pirelli’s experience in the World Superbike Championship. The result: dual-compound front tyres, with three different application zones, and tri-compound rear tyres with five application zones to optimise the contact patch and achieve top road and track grip under all surface conditions, dry or wet, at any lean angle.
A new tread pattern with a slick shoulder zone optimises the contact patch and ensures more even wear. Aspect ratio and structure are also racing-derived and designed to maximise cornering agility and ‘feel’.
The Panigale V2 features the 43 mm Showa BPF fork at the front, which provide full adjustability in spring pre-load, compression and rebound damping. The Showa Big Piston Fork (BPF) considerably improves damping control at low speed, ensuring lower-pressure oil feed and reducing the amount of fluid needed for compression and rebound adjustment. This results in improved suspension performance and significant weight savings compared to traditional fork types.
A Sachs steering damper completes the front-end package.The rear suspension features a fully adjustable, Sachs monoshock, which reacts to the motion imparted by the die-cast single-sided aluminium swingarm via progressive-rate linkage. The shock absorber is side mounted to make the unit fully accessible for rebound and compression damping and spring pre-load adjustments.
The Panigale V2 has fork slide out by 2 mm and a new shock absorber 2 mm longer that together with the new Pirelli Diablo Rosso Corsa II tires make the bike more intuitive, agile and fun to ride, moreover a fine-tuning of the suspension hydraulic setting improve comfort in road use.
The Panigale V2 frame consists of a compact, enhanced-strength die-cast aluminium monocoque structure that uses the Superquadro engine as a stressed member.
Attached directly to the cylinder heads, the monocoque frame protrudes forward to house the steering head bearings, contained in two aluminium bushes. In addition to working as a frame, the monocoque also acts as an air-box; it contains not just the air filter but also the throttle bodies and the fuel circuit, complete with injectors, and is sealed off by the steel fuel tank bottom.
The front-end geometry has 24° of rake and 95 mm of trail. At the rear, instead, the double-sided swingarm has been replaced with a sophisticated, fully die-cast aluminium single-sided swingarm. The bike has a 1,436 mm wheelbase and weight distribution is 52% at the front and 48% at the rear.
On the Panigale V2 the engine acts as a stressed member of the frame. Set 90° apart, the cylinders are banked rearwards around the crankshaft axis, resulting in a 21° angle between front cylinder and horizontal plane. The two cylinder heads and aluminium top covers feature a ribbed design to reduce mechanical noise. The crankcases are vacuum die-cast using Vacural® technology to optimise weight saving and ensure consistent wall thickness and increased strength. Crankcase cover, clutch cover and sump are all made of die-cast aluminium.
The Superquadro engine uses brass bushings for the crankshaft, lubricated with pressurised oil via ducting inside the crankcase. This ensures efficient lubrication of the crankshaft and rapid oil recovery thanks to a lobe pump that – as on MotoGP racing engines – lowers the pressure in the connecting rod casing. Operated by a shaft, in turn driven by a gear train, the pump keeps the casing zone underneath the pistons in a controlled, constant low pressure state, thus reducing the resistance encountered by connecting rod rotation at high engine speeds and ensuring efficient oil recovery at all engine speeds.
The compression ratio is 12.5:1. The 955 cm³ displacement is obtained with a 60.8 mm stroke and 100 mm bore, measurements that flawlessly combine good handling and fluid power delivery. A 100 mm bore allows for large valve diameters: 41.8 mm for the intake and 34 mm for the exhaust. The valves are controlled by a Desmodromic system with racing-derived rocker arms, ‘super-finished’ and with a special DLC (Diamond-Like Carbon) facing for reduced friction and increased fatigue strength.
Transmission features a six-speed gearbox with the Ducati Quick Shift up/down EVO 2 system and an oil bathed clutch. The latter has an anti-patter and progressive self-servo mechanism that compresses the friction plates when under drive from the engine without any extra effort required from the rider to release the clutch.
Performance enhancement largely stems from the new injectors (two per cylinder, one above and one below the butterfly, larger, and re-angled) and the new inlet ducts which, delivery rates remaining equal, lose less pressure than their predecessors, thus boosting intake efficiency. Oval throttle body dimensions remain unchanged with an equivalent diameter of 62 mm. Throttle bodies are controlled independently of each other via a full Ride by Wire system.
The 955 cm³ twin cylinder Superquadro engine complies with Euro 5 standards. Compared to the engine on the 959 Panigale it delivers an additional 5 hp and 2 Nm more of torque. it also features a new compact exhaust silencer, routed entirely underneath the engine.
With a maximum power of 155 hp at 10,750 rpm and a torque of 104 Nm at 9,000 rpm, this twin cylinder engine delivers power smoothly and enjoyably on the road while remaining forceful – yet always under control – on the track.
The SuperSport’s compact instrument panel has lights on the upper part of the dashboard for warnings relating to neutral, indicators, full beams, engine rpm limit, oil pressure and fuel reserve, while the lower part is comprised of an LCD display with a DOT-Matrix area to display all the other data. The SuperSport’s compact instrument panel has lights on the upper part of the dashboard for warnings relating to neutral, indicators, full beams, engine rpm limit, oil pressure and fuel reserve, while the lower part is comprised of an LCD display with a DOT-Matrix area to display all the other data. The display gives information about speed, rpm. totaliser, trip1 and trip2, engine cooling liquid temperature, ambient temperature, clock and gear engaged. In addition, it displays present fuel leve, fuel consumption, average fuel consumption, average speed and duration of trip. The DOT-Matrix area permanently displays the Riding Mode selected and the corresponding ABS and DTC levels set.
The ABS system is the 9MP multi-calibration ABS, meaning the rider has the possibility to switch from one configuration to another by selecting the appropriate Riding Mode. The ABS system is the 9MP multi-calibration ABS, meaning the rider has the possibility to switch from one configuration to another by selecting the appropriate Riding Mode. 9MP ABS prevents front and rear wheels from locking, and has refined rear wheel lift-up prevention to offer the shortest stopping distance and high stability by using the information of a sensor measuring pressure at the front wheel caliper. ABS can be deactivated if the rider wishes. ABS-Off can be loaded as a configuration of a riding mode and is maintained after switching the key off.
Ducati branded DTC offers a choice of eight profiles, or ‘sensitivity levels’, each one programmed with a wheel-spin tolerance matched to progressive levels of riding skill, graded from one to eight. Ducati branded DTC offers a choice of eight profiles, or ‘sensitivity levels’, each one programmed with a wheel-spin tolerance matched to progressive levels of riding skill, graded from one to eight.
The wheels mount the new Pirelli Diablo Rosso III tyres, 120/70 ZR 17 at the front and 180/55 ZR 17 at the rear. The wheels mount the new Pirelli Diablo Rosso III tyres, 120/70 ZR 17 at the front and 180/55 ZR 17 at the rear.
The sporty attitude of theSuperSport is emphasized by its very aggressive sport rim design. The bike has Y-pattern 3-spoke wheels in lightweight aluminum. The sporty attitude of theSuperSport is emphasized by its very aggressive sport rim design. The bike has Y-pattern 3-spoke wheels in lightweight aluminum.
The Ducati Quick Shift (DQS) up/down is an electronic system derived from racing that allows for gear changing and shifting without using the clutch and without closing the throttle when up-shifting. The Ducati Quick Shift (DQS) up/down is an electronic system derived from racing that allows for gear changing and shifting without using the clutch and without closing the throttle when up-shifting. Helping the rider to save precious seconds in acceleration and avoid distractions during corner entry, the system is particularly useful in city traffic, while also ensuring greater enjoyment during sports use.
Extreme attentiveness to the ergonomic triangle, aerodynamic protection and the rider’s freedom of movement has resulted in comfort, versatility and jaw-dropping sports handling. Extreme attentiveness to the ergonomic triangle, aerodynamic protection and the rider’s freedom of movement has resulted in comfort, versatility and jaw-dropping sports handling. The rider zone of the one-piece seat is just 810 mm off the ground, allowing feet to be placed firmly on the ground. Handlebar height does not place undue strain on the wrists and foot peg positioning prevents knees becoming tired while maximising control. The height-adjustable Plexiglas screen can be set to two different positions over 50 mm of travel, ensuring adequate airflow protection even at motorway speeds; enhanced protection can be had by fitting the larger Plexiglas touring screen, available as an accessory. Comfortably separated rider and passenger footpegs and a snugly compact lateral silencer ensure maximum freedom of movement. The benefits of the riding position are evident during both everyday and medium-length journeys and also ensure fun-packed sports riding.
The Ride-by-Wire (RbW) system is an electronic interface between the twistgrip and engine, which configures an ideal power response depending on the riding mode selected. The Ride-by-Wire (RbW) system is an electronic interface between the twistgrip and engine, which configures an ideal power response depending on the riding mode selected. The twistgrip does not have a throttle cable connected directly to the throttle body butterflies, but instead delivers a signal to a control unit, which in turn operates an electronically controlled butterfly. The RbW system uses three different mappings to regulate power delivery: 110 hp with a sports-type delivery 110 hp with a progressive delivery suitable for a more relaxed riding style 75 hp with a progressive delivery for city use or on low grip surfaces
The SuperSport is powered by a specially adapted version of the already renowned and appreciated 937 cm3 twin-cylinder Ducati Testastretta 11°. “The SuperSport is powered by a specially adapted version of the already renowned and appreciated 937 cm3 twin-cylinder Ducati Testastretta 11°. Euro 4-rated, it has four valves per cylinder, a secondary air system, liquid cooling, a 12.6:1 compression ratio and bore and stroke measurements of 94 and 67.5 mm respectively. Engine output amounts to a huge 110 hp at 9, 000 rpm and a maximum torque of 93 Nm at 6,500 rpm. On the SuperSport, the Testastretta 11° engine features crankcase and cylinder heads that have been redesigned to make the power unit an integral part of the frame; further modifications include re-routing of the water through the heads and a specifically designed alternator cover to allow installation of the new gear sensor. Large 53 mm throttle bodies – smoothly controlled by the full Ride-by-Wire system – allow the engine to gulp in the air-fuel mix. Moreover, this engine also features unprecedented control and injection systems.
The Multistrada 950 instrument panel consists of a large easy-to-see LCD that provides the rider with primary and secondary information. The unit gives info on speed, rpm, total distance ridden, selected gear, trip1 and trip2, engine coolant temperature, fuel level and, of course, a clock. And that’s not all: the display shows the selected Riding Mode, miles remaining, real-time fuel consumption, average fuel consumption, average speed, air temperature, travel time and road ice warning.
Ducati Riding Modes, first introduced on the Multistrada in 2010, let riders select different pre-set modes that optimise bike behaviour according to their individual riding styles and road conditions. The Multistrada 950 has four Riding Modes (Sport, Touring, Urban and Enduro), each programmed to act on the electronic Ride-by-Wire (RbW) engine control system and the ABS and DTC levels. The available modes stem from a combination of cutting-edge dedicated technologies.
Multistrada 950 standard equipment includes a Brembo braking system with ABS, controlled by the Bosch 9.1 MP control unit with integrated pressure sensor, which is part of the Ducati Safety Pack (DSP). The 3-level system ensures short stopping distances and stability whatever the riding conditions thanks to full integration with Riding Modes.
The Multistrada 950 is equipped with a DSP (Ducati Safety Pack) that includes ABS and Ducati Traction Control, enhancing bike performance, optimising control and boosting safety levels. This package is managed via four different Riding Modes, each of which (Sport, Touring, Urban and Enduro) gives the Multistrada 950 a distinctive personality thanks to different ABS and DTC (Ducati Traction Control) settings.
The Multistrada 950 is equipped with a front headlight with an aggressive and technological design, typical of bikes in the Multistrada family. At the rear is a LED light. The Multistrada 950 also boasts the hazard light function, activated by pressing the dedicated button.
The Multistrada 950 is equipped with alloy rims on which are mounted Pirelli SCORPION Trail II tyres in sizes 120/70 R19 at the front and 170/60 R17 at the rear. SCORPION Trail II. This tyre represents the meeting of two paths: off-road racetracks and touring roads. Created for the most demanding of bikers, its strengths include high mileage, consistent performance over its entire life cycle and first-rate behaviour in wet conditions.
The exhaust system layout is based on two primary manifolds that merge directly in the single 2-chamber silencer; the latter, in addition to acting as a 2-1-2 collector, contains the catalytic converter. From here two pipes exit directly towards the light, compact silencers, which are side-mounted in a high position and feature aluminium alloy outer sleeves.
The twin cylinder Testastretta 11° engine on the Multistrada 950 features two new cylinder heads with a redesigned oil circuit and secondary air intake ducts on the covers. The Multistrada 950 gulps in the fuel mix through new 53 mm cylindrical-section throttle bodies controlled by an advanced Ride-by-Wire system. Moreover, this engine also features a new control unit and electronic injection system. The exhaust system is of the 2-1-2 type with lateral silencer.
The Multistrada 950 is powered by the already renowned twin cylinder 937 cm3 Testastretta 11°, now extensively overhauled. EURO 4-rated, it has four valves per cylinder, liquid cooling and bore and stroke measurements of 94 and 67.5 mm respectively. Engine power amounts to a maximum of 113 hp at 9,000 rpm and a maximum torque of 96.2 Nm at 7,750 rpm. The compression ratio is 12.6:1.
In addition, the app makes available information on maintenance schedules, the user manual and the Ducati Store locator. Finally, the Ducati Link App lets you record your performance and travel itineraries so you can share your experiences on the new Diavel with the community of Ducatistas who already use it.
The headlight automatically moves from the daylight to the night configuration thanks to a sensor on the instrument panel. Moreover, the Diavel 1260 S has the front headlight featuring the Daytime Running Light (DRL) system (where allowed). DRL is a specific daylight position lamp ensuring perfect bike visibility during the day; at the same time, thanks to its specific reversed horseshoe shape, makes the Diavel 1260 easy to spot also against the sunlight.
The Diavel 1260 features the automatic switch-off function of LED turn indicators based on the leaning angle of the bike. Thanks to the use of the IMU inertial platform, the turn signals turn off after finishing the turn or after having travelled a certain distance.
The instrument panel provides for four display modes. The Default mode only displays the basic elements with a particularly stylish design and is a new feature for Ducati. The other three, in turn, are the classic Track, Full and City displays matched with the Riding Modes.
The Diavel 1260 is fitted with dedicated electrical boxes with red, backlit buttons. The Cruise Control function requires dedicated buttons in order to engage the system and adjust speed. In static conditions it is possible to access a setting menu through the left handlebar box in order to adjust various functions, including DTC, DWC and ABS. In either static or dynamic conditions, it is possible to switch Riding Mode, choosing between Sport, Touring and Urban.
Moreover, the Diavel 1260 S is fitted with the Ducati Multimedia System (DMS): by connecting a smartphone to the instrument panel via bluetooth, it is possible to manage and display incoming calls and text messages, besides displaying all information concerning the current playlist. DMS is available as an accessory also on Diavel 1260.
The new Diavel 1260 is fitted with a Hands Free system, whereby ignition can happen without a mechanical key. Just keep the electronic key in your pocket and move close to the bike. When you are about 1.5 metres away the bike will recognise the key code and allow ignition. At this point you can simply press the key-on button to turn on the instrument panel and then start the engine.
DPL is engaged by pressing the relevant button located on the right switch. Once engaged, the level of action can be adjusted on the setting menu available on the instrument panel. Once the level has been selected, the rider must press the clutch, shift into first gear and completely open the throttle. Now, by simply and gradually releasing the clutch, the bike will launch very quickly while the DPL system takes care of managing the engine throttle opening. In order to safeguard the clutch, the system uses an algorithm allowing only a limited number of consecutive launches. Launches are reloaded one at a time under normal riding conditions.
In the space of a few thousandths of a second, DTC is able to detect and subsequently control the sliding of the rear wheel, helping to considerably increase the bike’s performance and safety. The system offers eight different settings to choose from. Levels 1 and 2 are specific for sporty riding and allow high degrees of skidding on the rear tyre. Levels 3 through 6 are designed to provide a better grip on dry asphalt, while levels 7 and 8 were conceived to provide optimal grip on wet asphalt.
ABS Cornering aptly uses the signals from Bosch’s IMU platform to maximise balancing of the braking power delivered to the front and rear wheels even in critical situations and with the motorcycle in a leaning position. By interacting with the Riding Modes, the system is able to provide the ideal solution for every situation and riding condition or rider’s preferences. The system has three different intervention levels. Level 1 offers the highest performance for sporty use, eliminating the Cornering function, rear lift-up detection and allowing rear dumping during braking with the ABS applied to the front only. Level 2 ensures the balance between the front and the rear without rear lift-up detection, though it enables the Cornering function, set on purpose for a sporty riding style. Level 3 allows to optimise braking performance by detecting rear lift-up and enabling the Cornering function, set on purpose for maximum safety (safe & stable configuration).
On the front the wheel rim is 3.5” x 17’’, while on the back the model mounts one 8.0” x 17’’ rim. The front rim also features a 120/70 ZR17 tyre, while the rear tyre is of a 240/45 ZR17 type. The tyres are Pirelli Diablo Rosso III. The wide rear tyre makes the most of the double mix technology to increase the grip in the sportier bends, while ensuring high mileage, and applies the EPT (Enhanced Patch Technology) technology in order to maximise the contact at any cornering angle. The tread design and the mix used ensure outstanding performance in any condition.
The frame is fixed to the engine by the two cylinder heads, much like the cast aluminium rear subframe. The engine is also secured to two forged aluminium plates surrounding the cast aluminium single-sided swinging arm. The Diavel wheelbase has a size of 1,600 mm and, thanks to the nimble chassis and the possibility to reach a maximum cornering angle of 41°, guarantees Ducati level performance on mixed terrain.
The steering head angle is 27°, the front end is 120 mm. Thus the Diavel 1260 setup makes the front end nimble and easy to handle, thus ensuring extreme user friendliness and a remarkable steering angle.
The compression adjuster and spring preload of the fork are on the left fork leg, while the extension adjuster is on the right leg. On the other hand, at the rear the Diavel 1260 has an adjustable mono-shock in the spring preload and in extension.
In turn, the Diavel 1260 S is fitted, for the first time ever, with a fully adjustable 48-mm diameter Öhlins fork and an Öhlins shock-absorber, also fully adjustable. Öhlins suspensions ensure not only an impeccable response in terms of bike dynamic performance, but also outstanding comfort on any type of terrain; moreover, they account for a truly precious-looking bike with their characteristic gold finish.
The new Diavel boasts a new trellis frame with well exposed steel tubes, matched with an aluminium swinging arm whose size was conceived to give this bike outstanding agility in the bends, a great feel and easy riding. The rear tyre, 240 mm wide by 17” across, has always been a key distinctive sign of the Diavel. Thanks to the new chassis, it ensures outstanding handling and cornering angles, but also a great level of comfort for the rider and the passenger alike, mostly thanks to the upright position it allows, not to mention the generously padded seat.
Thanks to the Desmodromic Variable Timing (DVT), the engine delivers a very linear and sizeable torque at low rpm, with very sporty performance at higher rpm.
The Testastretta DVT 1262 features characteristic bore and stroke measures at 106 x 71.5 mm, and a compression ratio of 13.0 : 1, delivering a maximum power of 159 hp at 9,500 rpm * and maximum torque of 129 Nm at 7,500 rpm. Fuel is delivered by a Bosch electronic injection system on elliptical throttle bodies having diameter equivalent to 56 mm, managed by a full Ride-by-Wire system.
Moreover, the Diavel 1260 engine stands out for an extremely accurate design; thanks to the water pump being located in the cylinder V, the cooling system pipes are no longer positioned on the left side.
Testastretta DVT 1262 is fitted with a Dual Spark (DS) system, i.e. two spark plugs for each cylinder head, which exploits a secondary air system that supplies cool air into the exhaust duct in order to complete the oxidisation of unburned hydrocarbons and reduce the level of polluting gasses (e.g. HC and CO) without affecting the performance levels.
Maintenance intervals are expected to be every 15,000 km (or 12 months), while valve play must be checked every 30,000 km.
The system works both when upshifting, for full throttle racing accelerations, and downshifting, with the reduction being more fluid thanks to the “blipper” that harmonises the engine’s revolutions with the rotation speed of the primary shaft to avoid jamming, all supported by a clutch with anti-hop system.
DQS is available as an accessory also on Diavel 1260.
The Ducati Testrastretta DVT (Desmodromic Variable Timing) engine, which varies both the timing of the camshaft that controls the intake valves, and the camshaft that controls the exhaust valves independently, optimises performance at high speeds to achieve maximum power, while improving smooth delivery and increasing torque at low and medium range speeds.
This means you have an engine that changes its characteristics by continuously varying the rpm without the rider even noticing it, remaining within the Euro 4 approval requirements whilst paying great attention to fuel consumption.
